Adding a 2nd Scanner

VisitorRego has the ability to add a second scanner. This can be used as a second sign out point for those scanning their unique barcode to sign out of your site.

To add a second scanner, from Admin mode, choose Options> System Setup> Scanner tab.

Use the drop down box to choose the Com Port number of each scanner. 

Click Apply to hold any changes. 

• Related Articles

• Adding a Contractor

  There are three different ways to add contractors to the VisitorRego Portal From the contractor list From a contractor company If the contractor has already signed in Adding a contractor from the contractor list The Contractors> Contractors tab ...

• How to Connect/Re-connect Scanner (Pre V10)

  This article applies to VisitorRego versions prior to V10. For information on how to connect/re-connect a scanner in V10 or higher, please refer to the knowledge base article How to Connect/Re-connect Scanner. The barcode scanner is connected using a ...

• Adding an Additional Field to the Label

  Adding an additional field to the visitors label for example, car registration, can be edited in Visitor Rego. Navigate to Options > Registration setup to find the database field. The database field for car registration is called‘Vehicle’. Navigate ...

• Adding permits to a company

  In the Company Permits and Insurance section, press the Add Permits button. The Add Permits pop up will display any permits that have already been set up. If you need a permit that is not on the list you can add this by clicking the Add New Permit ...

• Adding Certificates/Documents to a Contractor

  Find the Contractor you wish to certify and navigate to their Contractors Authorisation Screen by clicking the icon in the 'Fit' column. Click the symbol in the 'Fit' column to open their contractor profile To add a certificate or document click the ...